NCC 2019 Volume One Amendment 1
Search the National Construction Code editions
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c
Section D Access and egress

Section D Access and egress

After DP9 add Tas DP10

Tas DP10

A building or part of a building must be accessible in accordance with the requirements of a Standard made under the Disability Discrimination Act 1992 (Cth).

Delete D3.0 Deemed-to-Satisfy Provisions and substitute:

D3.0 Deemed-to-Satisfy Provisions

(a)

Where a Deemed-to-Satisfy Provisions is proposed, Performance RequirementsDP1 to DP6, DP8, DP9 and Tas DP10 are satisfied by complying with—

(ii)

in a building containing an atrium, Part G3; and

(iii)

additional requirements for Class 9b buildings, Part H1; and

(iv)

for public transport buildings, Part H2.

(b)

Where a Performance Solution is proposed, the relevant Performance Requirements must be determined in accordance with A2.2(3) and A2.4(3) as applicable.

After D3.4(c) add Tas D3.4(d)

Tas D3.4 Exemptions

(d)

The Class 2 parts of a building where—

(i)

the building is an existing building with a rise in storeys of two; and

(ii)

the storey at ground level is Class 5 or 6; and

(iii)

the upper storey is comprised of two or more Class 2 sole-occupancy units that are not made available for short-term rental.

After D3.12 add Tas D3.13

Tas D3.13 Compliance with Premises Standards

(a)

A building solution must comply with the Disability (Access to Premises – Buildings) Standards.

(b)

A building solution complies with Tas D3.0(a) if it complies with the applications, exceptions and concessions in the Disability (Access to Premises – Buildings) Standards.