NCC 2019 Volume Two Amendment 1
Search the National Construction Code editions
Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c

Filter

Classification
Building class 1a Building class 1b Building class 2 Building class 3 Building class 4 Building class 5 Building class 6 Building class 7a Building class 7b Building class 8 Building class 9a Building class 9b Building class 9c Building class 10a Building class 10b Building class 10c
List of amendments—NCC 2019 Amendment 1—Housing provisions

List of amendments—NCC 2019 Amendment 1—Housing provisions

This list has been prepared by the Australian Building Codes Board to assist National Construction Code (NCC) users in identifying changes incorporated in Amendment 1 to the 2019 edition of NCC Volume Two. The notes provide a description of major changes made from the previous edition of Volume Two.

While the Australian Building Codes Board has attempted to include all major changes made from the previous edition of Volume Two, the Board does not give any warranty nor accept any liability in relation to the contents of this list of amendments.

List of Amendments
Reference Changes and Commentary

A2.2(4)

A new sub-clause has been added to require a process be followed when undertaking a Performance Solution.

A5.7

A new provision has been added to require labelling of Aluminium Composite Panels.

Part 3.5 Clause 3.5.2.5

The provision has been amended to clarify when an anti-ponding device/board is required.

Schedule 2

An abbreviation, 'ACP', has been added for Aluminium Composite Panel.

Schedule 3

A defined term, 'Aluminium Composite Panel (ACP)', has been added.

Schedule 3

The defined term 'Performance-based design brief (PBDB)' has been amended on account of the introduction of A2.2(4).

Schedule 4

The 2019 edition of SA TS 5344 'Permanent labelling for Aluminium Composite Panel (ACP) products' has been referenced.